nyloprint® WS 175

Hot moulding plate for mounting magnetically, also for hot foil stamping

Plate thickness:
Fill the form to download the file
  • English
  • Polish
  • Deutsch
  • Spanish
  • Japanese
  • Chinese
  • French
  • Italian
  • Russian

Product Overview

  • Water
  • Steel
  • Letterpress
  • Analogue


Thanks to the heat resistance properties (up to 130 °C / 266 °F) of nyloprint® WS 152/175 metal based plates, they are ideally suited for hot moulding to produce rubber clichés.

Suitable equipment

The nyloprint® WS plates can be processed with nyloprint® processing equipment and all similar devices. The nyloprint® WS-S Digital can be used with all IR-laser systems suitable for imaging letterpress plates. For washout the use of brushes in the washer is recommended.

Washout medium

For washout only pure tap water is needed.

Processing information

A detailed description of the individual platemaking steps, as well as detailed information about processing and storing can be found in the nyloprint® User Guide.

High quality standard

XSYS printing plates are produced at Willstätt production site, which is certified according to international standards for quality management (DIN EN ISO 9001:2015), environmental management (DIN EN ISO14001:2015) and energy management (DIN EN ISO 50001:2018).


Base Material
Colour of raw plate
Total thickness (mm) (inch)
1.75 (0.069")
Plate hardness (Shore D)
Relief depth (mm) (inch)
1.45 (0.057")
Tonal range (%)
at screen ruling of
60 l/cm (150 lpi)
Fine line width (down to μm)
Isolated dot diameter (down to μm)
Distortion factor (mm) (inch)
10.05 (0.396")
Main exposure (min) to be tested
to be tested
Washout time
Washout temperature
45°C / 113° F
Drying time at 80°C / 176°F (min)
Post exposure (min)

Similar products:

  • Steel

Direct engravable pad printing plate for highest print resolution

View Details