Product Overview
-
Thermal Plate
-
Flat Top Dot-Smooth
-
Paper
-
GD2
-
Film
-
All Ink Types
-
Digital
Benefits
- Best properties for a flexo plate in the Tag & Label in one plate for all inks to combine jobs efficiently with minimum plate waste
- Excellent ink transfer and better impression latitude out of the box due to inherent flat top dots
- Reduced downtime due to Anti-Ink-Filling (AIF) properties keeping plate clean for longer runs
- Quick to color minimizing start-up time and waste
- Compatible with the same screening and pre-press technologies used for solvent plates
- A standard UV tube exposure system is sufficient, no need to invest into newer technology
- Low highlight dot gain for consistent print quality over longer print runs
Suitable equipment
nyloflex® XTP Digital plates may be exposed using any nyloflex® exposure system and all similar devices and can be used with all laser systems suitable for imaging flexo printing plates. nyloflex® XTP Digital plates must be processed with the nyloflex® Xpress Thermal Processor
Processing information
A detailed description of the imaging, exposure and finishing steps, as well as detailed information about handling and storing, can be found in the nyloflex® User Guide.
High quality standard
XSYS printing plates are produced at Willstätt production site, which is certified according to international standards for quality management (DIN EN ISO 9001:2015), environmental management (DIN EN ISO14001:2015) and energy management (DIN EN ISO 50001:2018).
Specifications
Color of raw plate
light blue
Total thickness (mm)
1.70
Hardness acc. to DIN 53505
59
Plate hardness (Shore A)
69
Recommended relief depth (mm)
0.6
Tonal range (%)
2-98
at screen ruling of (l/cm)
54
Fine line width (down to μm)
40-80
Isolated dot diameter (down to μm)
200
Back exposure (s)
20–40
Main exposure (min)
8
Post exposure UV-A (min)
8
Light finishing UV-C (min)
4-6
UVA bulb output (mW/cm²)
≥17
