nyloflex® FAC 635 D
Established performance for corrugated post-print
Main specifications
- Base materialPolyester film
- Color of raw platePurple with black LAMS layer
- Total thickness (mm) (inch)6.35 (0.250")
- Finished plate hardness (Shore A)30
- Relief depth (mm | inch)2.2 - 3.0
Main specifications
- Base materialPolyester film
- Color of raw platePurple with black LAMS layer
- Total thickness (mm) (inch)6.35 (0.250")
- Finished plate hardness (Shore A)30
- Relief depth (mm | inch)2.2 - 3.0
nyloflex® FAC 635 D Overview
Benefits
Plate Charecteristics
- Soft photopolymer flexographic plate.
- Designed for high-performance corrugated post-print applications.
- Meets all printing requirements, from rough and uneven substrates to pressure-sensitive and soft paper substrates.
- Exceptional robustness and durability.
- Suitable for both bank and LED exposure.
Segmentation
Suitable for all types of corrugated substrates, including:
- Coated / uncoated kraft liner
- Coated / uncoated test liner
- Pressure-sensitive and soft paper substrates
Suitable equipment
The nyloflex® FAC Digital can be processed with nyloflex® processing equipment and all similar devices.
The nyloflex® FAC Digital can be used with all laser systems suitable for imaging flexo printing plates.
Printing inks
Suitable for all water based and solvent based printing inks.
Washout solvents
Especially good results are achieved with nylosolv® and SOLVIT® washout solvents. nylosolv® and SOLVIT® can be distilled and reused.
Processing information
A detailed description of the imaging, exposure and finishing steps, as well as detailed information about handling and storing, can be found in the nyloflex® User Guide.
High quality standard
XSYS printing plates are produced at Willstätt production site, which is certified according to international standards for quality management (DIN EN ISO 9001:2015), environmental management (DIN EN ISO14001:2015) and energy management (DIN EN ISO 50001:2018).
Get in touch
Let’s optimize your printing process!
Contact us for innovative solutions and expert support.
Specifications
The main specifications of the nyloflex® FAC 635 D
- Base materialPolyester film
- Color of raw platePurple with black LAMS layer
- Total thickness (mm) (inch)6.35 (0.250")
- Finished plate hardness (Shore A)30
- Relief depth (mm | inch)2.2 - 3.0
- Fine line width ( m)250
- Isolated dot diameter ( m)400
- Back exposure (s)80 - 250
- Main exposure (min)10 – 15
- Washout speed (mm/min)50 - 90
- Drying time at 60°C / 140°F (h)2.5 - 3.0
- Post exposure (UV-A) (min)8
- Light finishing (UV-C) (min)5 - 8
- Laser intensity (J/cm )3.4 J/cm² (depending on Laser manufacturer and model)
Product Brochure EN 
