nyloflex® FTC 284 D

For the highest print quality on standard to high quality corrugated substrates

Product Overview

  • Solvent Plate
  • Flat Top Dot-Smooth
  • Coated Kraft Liner
  • Coated Test Liner
  • Water Based Ink
  • Digital
  • Inherently flat top flexo plate to cope with all challenges in corrugated post print
  • Significant fluting reduction on various corrugated boards, from fine to rough flute
  • Suitable for all water based printing inks

Benefits

Convincing print results

  • Excellent ink transfer allows for smooth solids, with even ink laydown, thus improved and consistent print results
  • Superior print resolution – precise reproduction of fine details, sharp and defined elements, text and codes
  • Reduced bump-up and consistent dot gain over the whole print run

Simplify prepress and plate making

  • Reduce cost, save time: No additional equipment, processing steps or consumables needed
  • Improved reproducibility and consistency due to less error sources during plate making

Improve productivity and consistency

  • Less dot gain tolerances – on press the flat top dots are less impression sensitive than standard digital dots
  • Quick ready-to-press thus reduced start-up times and waste
  • Higher productivity due to superior stability at increased press speeds

Suitable equipment

The nyloflex® FTC Digital can be processed with nyloflex® processing equipment and all similar devices and can be used with all laser systems suitable for imaging flexo printing plates.

Printing inks

The nyloflex® FTC Digital is suitable for all water based printing inks.

Washout solvents

Especially good results are achieved with nylosolv® washout solvents. nylosolv® can be distilled and reused.

Processing information

A detailed description of the imaging, exposure and finishing steps, as well as detailed information about handling and storing, can be found in the nyloflex® User Guide.

High quality standard

nyloflex® printing plates are manufactured according to DIN ISO 9001, DIN ISO 14001 and DIN ISO 50001 standards and requirements. This process guarantees our customers consistent high quality products and services.

Specifications

Base material
polyester film
Color of raw plate
red with black LAMS layer
Total thickness (mm) (inch)
2.84 (0.112")
Hardness acc. to DIN 53505
32
Plate hardness (Shore A)
40
Recommended relief depth (mm)
0.9 – 1.2
Tonal range (%)
2 – 98
At screen ruling (l/cm)
48
Fine line width (down to μm)
100
Isolated dot diameter (down to μm)
200
Back exposure (s)
20 – 60
Main exposure (min)
10 – 15
Washout speed (mm/min)
130 – 150
Drying time at 60°C / 140°F (h)
2.5 – 3.0
Post exposure UV-A (min)
10
Light finishing UV-C (min)
1 – 4
Laser intensity (J/cm2)
Approx. 15 -20% higher than for standard nyloflex® digital plates.
Base material
polyester film
Color of raw plate
red with black LAMS layer
Total thickness (mm) (inch)
3.18 (0.125")
Hardness acc. to DIN 53505
32
Plate hardness (Shore A)
38
Recommended relief depth (mm)
0.9 – 1.5
Tonal range (%)
2 – 98
At screen ruling (l/cm)
48
Fine line width (down to μm)
100
Isolated dot diameter (down to μm)
200
Back exposure (s)
20 – 60
Main exposure (min)
10 – 15
Washout speed (mm/min)
100 – 130
Drying time at 60°C / 140°F (h)
2.5 – 3.0
Post exposure UV-A (min)
10
Light finishing UV-C (min)
1 – 4
Laser intensity (J/cm2)
Approx. 15 -20% higher than for standard nyloflex® digital plates.
Base material
polyester film
Color of raw plate
red with black LAMS layer
Total thickness (mm) (inch)
3.94 (0.155")
Hardness acc. to DIN 53505
32
Plate hardness (Shore A)
36
Recommended relief depth (mm)
1.0 – 1.5
Tonal range (%)
3 – 98
At screen ruling (l/cm)
48
Fine line width (down to μm)
300
Isolated dot diameter (down to μm)
750
Back exposure (s)
50 – 100
Main exposure (min)
10 – 15
Washout speed (mm/min)
100 – 130
Drying time at 60°C / 140°F (h)
2.5 – 3.0
Post exposure UV-A (min)
10
Light finishing UV-C (min)
1 – 4
Laser intensity (J/cm2)
Approx. 15 -20% higher than for standard nyloflex® digital plates.
Base material
polyester film
Color of raw plate
red with black LAMS layer
Total thickness (mm) (inch)
4.70 (0.185")
Hardness acc. to DIN 53505
32
Plate hardness (Shore A)
34
Recommended relief depth (mm)
1.2 – 2.2
Tonal range (%)
3 – 98
At screen ruling (l/cm)
48
Fine line width (down to μm)
300
Isolated dot diameter (down to μm)
750
Back exposure (s)
50 – 100
Main exposure (min)
10 – 15
Washout speed (mm/min)
80 – 120
Drying time at 60°C / 140°F (h)
3.0 – 3.5
Post exposure UV-A (min)
10
Light finishing UV-C (min)
1 – 4
Laser intensity (J/cm2)
Approx. 15 -20% higher than for standard nyloflex® digital plates.
Base material
polyester film
Color of raw plate
red with black LAMS layer
Total thickness (mm) (inch)
6.35 (0.250")
Hardness acc. to DIN 53505
32
Plate hardness (Shore A)
32
Recommended relief depth (mm)
2.2 – 3.0
Tonal range (%)
3 – 98
At screen ruling (l/cm)
32
Fine line width (down to μm)
300
Isolated dot diameter (down to μm)
750
Back exposure (s)
50 – 100
Main exposure (min)
10 – 15
Washout speed (mm/min)
60 – 90
Drying time at 60°C / 140°F (h)
3.0 – 4.0
Post exposure UV-A (min)
10
Light finishing UV-C (min)
1 – 4
Laser intensity (J/cm2)
Approx. 15 -20% higher than for standard nyloflex® digital plates.

Similar products:

  • Solvent Plate
  • Round Top Dot
  • Coated Kraft Liner
  • Uncoated Kraft Liner
  • Coated Test Liner
  • Uncoated Test Liner
  • Water Based Ink
  • Digital

The ideal plate for fine print quality on standard to high quality corrugated packaging

View Details
  • Solvent Plate
  • Flat Top Dot-Smooth
  • Coated Kraft Liner
  • Uncoated Kraft Liner
  • Coated Test Liner
  • Uncoated Test Liner
  • Water Based Ink
  • Digital

The perfect choice for fluting reduction in corrugated post print on test liners with recycled fibers

View Details