nyloflex® FTL 635 D

The perfect choice for fluting reduction in corrugated post print on test liners with recycled fibers

Plate thickness:
Fill the form to download the file
English
  • English
  • Polish
  • Deutsch
  • Spanish
  • Japanese
  • Chinese
  • French
  • Italian
  • Russian

Product Overview

  • Solvent Plate
  • Flat Top Dot-Smooth
  • Coated Kraft Liner
  • Uncoated Kraft Liner
  • Coated Test Liner
  • Uncoated Test Liner
  • Water Based Ink
  • Digital
  • Inherently flat top dot flexo plate to cope with all challenges in corrugated post print
  • Suitable for all water based printing inks
  • Very good washboard reduction on various substrates e.g. uncoated liners or kraft liners in combination with a C and B flutes

Benefits

Consistent print results

  • Stable printing of screened designs even when different impression settings are applied
  • Excellent ink transfer, with even ink laydown, thus improved and consistent print results, particularly in solid areas

Simple pre-press and plate making

  • Reduced press setup time, resulting in less start up waste of inks and substrate by up to 40%
  • Mylar and plate material cost savings up to 50% on a single colour separation
  • Saving cost due to combination of halftone images and solids on one plate instead of two plates
  • Inherent flat top dot technology with UV-A tube exposure reducing complexity and steps in the plate making process

Improve productivity and consistency

  • Less dot gain tolerances – on press the flat top dots are less impression sensitive than standard digital dots
  • Quick ready-to-press thus reduced start-up times and waste
  • Higher productivity due to superior stability at increased press speeds

Suitable equipment

The nyloflex® FTL can be processed with nyloflex® processing equipment and all similar devices and can be used with all laser systems suitable for imaging flexo printing plates.

Printing inks

The nyloflex® FTL is suitable for all water based printing inks.

Washout solvents

Especially good results are achieved with nylosolv® washout solvents. nylosolv® can be distilled and reused.

Processing information

A detailed description of the imaging, exposure and finishing steps, as well as detailed information about handling and storing, can be found in the nyloflex® User Guide.

High quality standard

XSYS printing plates are produced at Willstätt production site, which is certified according to international standards for quality management (DIN EN ISO 9001:2015), environmental management (DIN EN ISO14001:2015) and energy management (DIN EN ISO 50001:2018).

Specifications

Base material
polyester film
Color of raw plate
red with black LAMS layer
Total thickness (mm) (inch)
6.35 (0.250")
Hardness acc. to DIN 53505
28
Plate hardness (Shore A)
29
Recommended relief depth (mm)
2.0 – 3.0
Tonal range (%)
3 – 95
At screen ruling (l/cm)
24
Fine line width (down to μm)
300
Isolated dot diameter (down to μm)
750
Back exposure (s)
130 – 180
Main exposure (min)
10 – 14
Washout speed (mm/min)
60 – 70
Drying time at 60°C / 140°F (h)
4.0
Post exposure UV-A (min)
10
Light finishing UV-C (min)
2
Laser intensity (J/cm2)
Approx. 15 -20% higher than for standard nyloflex® digital plates.

Similar products:

  • Solvent Plate
  • Round Top Dot
  • Coated Kraft Liner
  • Uncoated Kraft Liner
  • Coated Test Liner
  • Uncoated Test Liner
  • Water Based Ink
  • Digital

The ideal plate for fine print quality on standard to high quality corrugated packaging

View Details
  • Solvent Plate
  • Flat Top Dot-Smooth
  • Coated Kraft Liner
  • Coated Test Liner
  • Water Based Ink
  • Digital

For the highest print quality on standard to high quality corrugated substrates

View Details