nyloprint® WS 83 PRO D
Dry Offset printing plate for the tube, cup and can market.
Main specifications
- Base Materialsteel
- Colour of raw plategreen
- Total thickness (mm) (inch)0.83 (0.033”)
- Plate hardness (Shore D)75 (54)
- Relief depth (mm) (inch)0.56 (0.022”)
Main specifications
- Base Materialsteel
- Colour of raw plategreen
- Total thickness (mm) (inch)0.83 (0.033”)
- Plate hardness (Shore D)75 (54)
- Relief depth (mm) (inch)0.56 (0.022”)
nyloprint® WS 83 PRO D Overview
Benefits
Higher print quality
+ Reproduction of finer details and less dot gain due to digital imaging
+ High dimensional stability
+ No defects caused by dust and damaged films
+ No data loss during transfer
+ Smoother plate surface can achieve higher density
+ Highly consistent especially when repeating plate processing
Cost effective and environmentally friendly
+ No film costs
+ No chemicals for film development
+ Electronic filing of graphics, film storage is redundant
+ Easy and fast data exchange – worldwide
Enhanced plate quality
+ For precise reproduction of fine highlights and smooth, uniform vignettes
+ LED optimized plate formulation
+ High resolution – up to 10 160 dp
Efficient, constant and fast plate processing
+ Highly productive and cost efficient
+ Optimized exposure characteristics when using an UV LED inline setup
+ Suitable for processing with all types of equipment – plush and brush washers as well as exposure with UV-A tubes of type 09N and 10R
+ Excellent contrast of the finished plate for easy visual check
Product applications
+ Ideal for cans, cups and tubes applications
+ Ideal for security printing and label printing
+ Suitable for rotary letterpress, imprinting units and special-purpose printing presses
Highest print quality
+ High print contrast with an exceptional tonal range
+ For enhanced reproduction characteristics: finest details and deeper reverses – thus wide tonal range and soft fade-outs
+ Superior ink transfer, for very even ink laydown and improved solid ink density
+ Very good durability for long print runs
Get in touch
Let’s optimize your printing process!
Contact us for innovative solutions and expert support.
Specifications
The main specifications of the nyloprint® WS 83 PRO D
- Base Materialsteel
- Colour of raw plategreen
- Total thickness (mm) (inch)0.83 (0.033”)
- Plate hardness (Shore D)75 (54)
- Relief depth (mm) (inch)0.56 (0.022”)
- Tonal range (%)1 – 98%
- Fine line width (down to μm)<100
- Isolated dot diameter (down to μm)<200
- Distortion factor (mm) (inch)4.49 (0.177”)
- Laser energy (J/cm2 ) approx.~ 2.8
- Main exposure (min)2.5 – 4.5
- Washout time4 – 5
- Washout temperature30°C / 86° F
- Drying time at 80°C / 176°F (min)10 – 15
- Post exposure (min)2
Product Brochure EN 