nyloflex® XFH 114 D
Textured Thermal Flat Top Dots out of the Box for flexible packaging. Achieve superior on-shelf appearance with smoother solids, consistent colors, and uniform highlights.
Main specifications
- Color of raw platelight blue
- Total thickness (mm)1.14 | 0.045
- Hardness acc. to DIN 5350560
- Plate hardness (Shore A)78
- Recommended relief depth (mm)0.46–0.56
Main specifications
- Color of raw platelight blue
- Total thickness (mm)1.14 | 0.045
- Hardness acc. to DIN 5350560
- Plate hardness (Shore A)78
- Recommended relief depth (mm)0.46–0.56
nyloflex® XFH 114 D Overview
The Highest print quality
Benefits
PLATE CHARACTERISTICS
- Hard photopolymer flexo plate with inherent flat top dot technology.
- Specially textured plate surface eliminates the need for surface screening to achieve good ink laydown.
- Delivers uniform ink transfer, high durability, and stable performance on press.
CONSISTENT PRINT QUALITY
- Smooth, homogeneous solids, uniform vignettes and soft fade-outs.
- Reduce cost and save time: No additional equipment or LED exposure required.
- No consumables needed for special surface screening trials.
- Flat Top Dot out of the box for thermal plate processing.
INCREASED PRODUCTIVITY & CONSISTENCY
- Less dot gain tolerances: Flat Top Dots are less impression sensitive than standard dots.
- Quick, ready-to-press setup reduces start-up times and waste.
- High wear resistance supports longer, more consistent print runs.
Suitable equipment
nyloflex® XFH Digital plates may be exposed using any nyloflex® exposure system and all similar devices and can be used with all laser systems suitable for imaging flexo printing plates. nyloflex® XFH Digital plates must be processed with the nyloflex® Xpress Thermal Processor.
Printing inks
Suitable for all solvent based and water based printing inks (ethyl acetate content preferably below 15%, ketone content preferably below 5%).
Processing information
A detailed description of the imaging, exposure and finishing steps, as well as detailed information about handling and storing, can be found in the nyloflex® User Guide.
Certification
XSYS printing plates are produced at Willstätt production site, which is certified according to international standards for quality management (DIN EN ISO 9001:2015), environmental management (DIN EN ISO14001:2015) and energy management (DIN EN ISO 50001:2018).
Get in touch
Let’s optimize your printing process!
Contact us for innovative solutions and expert support.
Specifications
The main specifications of the nyloflex® XFH 114 D
- Color of raw platelight blue
- Total thickness (mm)1.14 | 0.045
- Hardness acc. to DIN 5350560
- Plate hardness (Shore A)78
- Recommended relief depth (mm)0.46–0.56
- Tonal range (%)1–99
- at screen ruling of (l/cm)68
- Fine line width (down to μm)100
- Isolated dot diameter (down to μm)200
- Back exposure (s)10–25
- Main exposure (min)8–12
- Post exposure UV-A (min)8
- Light finishing UV-C (min)1–10
Product Brochure EN 
