nyloflex® ACT 254 D

Reliable Performance From Film to Paper and Beyond

Main specifications

  • Base materialPolyester film
  • Color of raw plateBlue with black LAMS layer
  • Total thickness (mm) (inch)2.54 (0.100")
  • Finished plate hardness (Shore A)54
  • Recommended relief depth (mm)0.9 – 1.2
All specifications

Main specifications

  • Base materialPolyester film
  • Color of raw plateBlue with black LAMS layer
  • Total thickness (mm) (inch)2.54 (0.100")
  • Finished plate hardness (Shore A)54
  • Recommended relief depth (mm)0.9 – 1.2
All specifications

nyloflex® ACT 254 D Overview

Solvent Plate
Coated Kraft Liner
Uncoated Kraft Liner
GD2
UV Ink
Pre-print
Bags & Sacks
Folding Carton
Paper wrappers
Gift wrappers

Benefits

Plate Charecteristics

  • Established, versatile medium durometer RTD plate.
  • Suitable for tube & LED exposure.
  • Optimized for paper and board applications with water-based ink systems, and additionally compatible with flexible packaging applications utilizing solvent-based inks.

Segmentation

  • Pre-print
  • Bags & Sacks
  • Folding Carton
  • GD2
  • Paper wrappers
  • Gift wrappers
  • Flexible Packaging

Suitable equipment

The nyloflex® ACT can be processed with nyloflex® processing equipment and all similar devices. The
nyloflex® ACT Digital can be used with all laser systems suitable for imaging flexo printing plates.

Printing inks

Suitable for all solvent based printing inks and UV inks. (ethyl acetate content preferably below 15%, ketone content preferably below 5%).

Washout solvents

Especially good results are achieved with nylosolv® and SOLVIT® washout solvents. nylosolv® & SOLVIT® can be distilled and reused.

Processing information

A detailed description of the imaging, exposure and finishing steps, as well as detailed information about handling and storing, can be found in the nyloflex® User Guide.

Certification

XSYS printing plates are produced at Willstätt production site, which is certified according to international standards for quality management (DIN EN ISO 9001:2015), environmental management (DIN EN ISO14001:2015) and energy management (DIN EN ISO 50001:2018).

Get in touch

Let’s optimize your printing process!
Contact us for innovative solutions and expert support.

Request Quote

Specifications

The main specifications of the nyloflex® ACT 254 D

  • Base materialPolyester film
  • Color of raw plateBlue with black LAMS layer
  • Total thickness (mm) (inch)2.54 (0.100")
  • Finished plate hardness (Shore A)54
  • Recommended relief depth (mm)0.9 – 1.2
  • Fine line width (down to μm)80
  • Isolated dot diameter (down to μm)200
  • Back exposure (s)25 – 60
  • Main exposure (min)8 – 12
  • Washout speed (mm/min)160 - 200
  • Drying time at 60°C / 140°F (h)2.0 - 3.0
  • Post exposure UV-A (min)8
  • Light finishing UV-C (min)6 – 10
  • Laser intensity (J/cm²)3.4 J/cm² (depending on Laser manufacturer and model)

Downloads

Please select a language:

* Some documents may not be available for other languages

nyloflex® ACT 254 D

Request Quote