nyloflex® eco ACT 114 D
The sustainable plate for paper & board applications
Main specifications
- Base materialPolyester film
- Color of raw platelight blue with black LAMS layer
- Total thickness (mm) (inch)1.14 (0.045")
- Finished plate hardness (Shore A)72
- Recommended relief depth (mm)0.5 – 0.7
Main specifications
- Base materialPolyester film
- Color of raw platelight blue with black LAMS layer
- Total thickness (mm) (inch)1.14 (0.045")
- Finished plate hardness (Shore A)72
- Recommended relief depth (mm)0.5 – 0.7
nyloflex® eco ACT 114 D Overview
- Sustainable medium hard photopolymer flexo plate for the perfect combination of halftones & solids
- Suitable for tube & LED exposure
- Dedicated for paper & board applications with water based inks and for all absorbent and non-absorbent commonly used substrates with solvent based inks
- Conditionally suitable for UV inks
Benefits
Plate Charecteristics
- Sustainable medium hard photopolymer flexo plate for the perfect combination of halftones & solids
- Suitable for tube & LED exposure
- Dedicated for paper & board applications with water based inks and for all absorbent and non-absorbent commonly used substrates with solvent based inks
- Conditionally suitable for UV inks
Sustainability
- Contains 24 – 29% renewable raw material1
- Proven, consistent quality in a more sustainable way
- Improved productivity on LED exposure units
- Energy saving due to 20% faster plate processing
- Consistent and reliable plate processing (waste reduction)
Improved Productivity
- Overall 20% faster plate processing possible when using nyloflex® eco plates (in direct comparison to standard nyloflex® ACT)
Suitable equipment
The nyloflex® eco ACT can be processed with nyloflex® processing equipment and all similar devices. The nyloflex® eco ACT Digital can be used with all laser systems suitable for imaging flexo printing plates.
Printing inks
Suitable for all water based and solvent based printing inks and conditionally suitable for UV inks. (ethyl acetate content preferably below 15%, ketone content preferably below 5%)
Washout solvents
Especially good results are achieved with nylosolv® washout solvents. nylosolv® can be distilled and reused.
Processing information
A detailed description of the imaging, exposure and finishing steps, as well as detailed information about handling and storing, can be found in the nyloflex® User Guide.
Certification
XSYS printing plates are produced at Willstätt production site, which is certified according to international standards for quality management (DIN EN ISO 9001:2015), environmental management (DIN EN ISO14001:2015) and energy management (DIN EN ISO 50001:2018).
Get in touch
Let’s optimize your printing process!
Contact us for innovative solutions and expert support.
Specifications
The main specifications of the nyloflex® eco ACT 114 D
- Base materialPolyester film
- Color of raw platelight blue with black LAMS layer
- Total thickness (mm) (inch)1.14 (0.045")
- Finished plate hardness (Shore A)72
- Recommended relief depth (mm)0.5 – 0.7
- At screen ruling (l/cm)60
- Fine line width (down to μm)60
- Isolated dot diameter (down to μm)100
- Back exposure (s)15 – 30
- Main exposure (min)8 – 12
- Washout speed (mm/min)230 – 280
- Drying time at 60°C / 140°F (h)1.5 - 2.0
- Post exposure UV-A (min)8
- Light finishing UV-C (min)6 – 8
Product Brochure EN 