
nyloflex® Seal F 116
Film based coating plate for print finishing
Main specifications
- Base materialpolyester film
- Color of raw plateviolet
- Total thickness (mm) (inch)1.16 (0.046“)
- Hardness acc. to DIN 5350536
- Plate hardness (Shore A)72
Main specifications
- Base materialpolyester film
- Color of raw plateviolet
- Total thickness (mm) (inch)1.16 (0.046“)
- Hardness acc. to DIN 5350536
- Plate hardness (Shore A)72
nyloflex® Seal F 116 Overview
Foil based photopolymer printing plate for inline and offline print finishing
Benefits
PLATE CHARACTERISTICS
- nyloflex® Seal F plates are monolayer plates. They consist of a light-sensitive photopolymer layer bonded to a polyester film.
PRODUCT FEATURES
- Especially developed for inline finishing in sheetfed offset presses with flexo coating units and for inline finishing in coating presses.
- For spot and full surface coating in commercial and packaging printing on coated papers and board.
- Excellent stability even with UV coatings and UV inks.
- High contrast colour change.
- Excellent dimensional stability due to thick polyester film.
- Wide exposure latitude.
- High resolution.
- Very good transfer of water-based dispersion and UV varnishes.
- High print contrast.
ADVANTAGES OF nyloflex® SEAL F DIGITAL
- Superior printing quality with sharper images, more open intermediate depths.
- Ideal for the coating of finest details.
- Consistency in quality for repeating jobs.
Suitable equipment
The nyloflex® Seal F can be processed with nyloflex® processing equipment and all similar devices. The nyloflex® Seal F Digital can be used with all laser systems suitable for imaging flexo printing plates.
Printing inks
nyloflex® Seal F and nyloflex® Seal F Digital coating plates are suited for water based dispersion and UV varnishes.
Washout solvents
Especially good results are achieved with nylosolv® washout solvents. nylosolv® can be distilled and reused.
Processing information
A detailed description of the imaging, exposure and finishing steps, as well as detailed information about handling and storing, can be found in the nyloflex® User Guide.
Certification
XSYS printing plates are produced at Willstätt production site, which is certified according to international standards for quality management (DIN EN ISO 9001:2015), environmental management (DIN EN ISO14001:2015) and energy management (DIN EN ISO 50001:2018).
Get in touch
Let’s optimize your printing process!
Contact us for innovative solutions and expert support.
Specifications
The main specifications of the nyloflex® Seal F 116
- Base materialpolyester film
- Color of raw plateviolet
- Total thickness (mm) (inch)1.16 (0.046“)
- Hardness acc. to DIN 5350536
- Plate hardness (Shore A)72
- Relief depth (mm)0.9
- Tonal range (%)3–90
- at screen ruling of (l/cm)48
- Fine line width (down to μm)300
- Isolated dot diameter (down to μm)750
- Elongation constant (mm)5.72
- Back exposure (s)10–12
- Main exposure (min)10–15
- Washout speed (mm/min)100–130
- Drying time at 60°C / 140°F (h)2
- Post exposure UV-A (min)10
- Light finishing UV-C (min)6–10