nyloflex® FHC 394

nyloflex® FHC 394 Overview

A monolayer plate that consists of a light sensitive photopolymer layer bonded to a polyester film.

Benefits

Plate characteristics

• The nyloflex® FHC is a monolayer plate. It consists of a light sensitive photopolymer layer bonded to a polyester film.

High plate hardness for reliable print quality

• Suitable for a broad range of corrugated substrates.
• Very good and consistent ink transfer with excellent area coverage.
• High solid density and minimal dot gain in halftones ensure sharp, clean results.
• Intermediate depths provide excellent contour definition for detailed prints.

Efficient handling and superior durability

• Convenient plate processing with short exposure times.
• High print run stability due to superior resistance against mechanical stress.
• Reduced cleaning cycles due to special surface properties.

Suitable equipment

The nyloflex® FHC can be processed with nyloflex® processing equipment and all similar devices.

Printing inks

Suitable for all water based and solvent based printing inks. (ethyl acetate content preferably below 15%, ketone content preferably below 5%).

Washout solvents

Especially good results are achieved with nylosolv® washout solvents. nylosolv® can be distilled and reused.

Processing information

A detailed description of the imaging, exposure and finishing steps, as well as detailed information about handling and storing, can be found in the nyloflex® User Guide.

Certification

XSYS printing plates are produced at Willstätt production site, which is certified according to international standards for quality management (DIN EN ISO 9001:2015), environmental management (DIN EN ISO14001:2015) and energy management (DIN EN ISO 50001:2018).